Scop of works
Roofs
- Cleaning & smoothing the surface
- Brushing and priming the surface with the specified primer.
- Isola Primer
- Providing and laying 4mm thick. Polyester reinforced water proofing membrane
with min.100mm overlaps with the specified membrane.
- SABIT – Plasto 4mm Black Saudi Arabia
- Providing and laying 4mm thick. Polyester reinforced water proofing
membrane for upstand and fixing into wall grooves.
- Water test 72 hours
- Providing and laying 50mm thick. Extruded polystyrene foam
- Providing and laying the specified separation sheet.
- GEO TEXTILE 100 gm
- Providing and laying average 100 mm thick .Screed mix in 3 x 3 m bays,
with good slopes to rainwater outlets.
- Minimum 3 days curing after completion of screed Filling Acrylic mastic MAXI) in screed expansion joints.
- CFilling Acrylic mastic (MAXI) In screed expansion joints.
- Applying of the top fillet after screed and painting it against cracks.
- Maxi Roof Coat
WET AREAS
FOUNDATIONS & WALL
- Cleaning & smoothing the surface
- Brushing and priming the surface with the specified primer.
- Isola Primer
- Providing and laying 4mm thick. Polyester reinforced water proofing membrane with min.100mm overlaps with the specified membrane.
- SABIT – Plasto 4mm Black Saudi Arabia
- Providing and laying 4mm thick. Polyester reinforced water proofing
membrane for upstand and fixing into wall grooves.
- Water test 48 hours
FOUNDATIONS & WALL
- Cleaning & smoothing the surface
- Brushing and priming the surface with the specified primer.
- Isola Primer
- Providing and laying 4mm thick. Polyester reinforced water proofing membrane with min.100mm overlaps with the specified membrane.
- SABIT – Plasto 4mm Black Saudi Arabia
BITUMAT – - Top seal 4mm Black Saudi Arabia - Providing and laying 4mm thick Protection board:
- BITUMAT - Bituprotect
Injection System
Supply and apply leak repair using PC crack Injection system for basement using Tampur 150 of Norment UK PU 400 of DR. FIXIT.
